Poster Abstracts Received

Organization
Primary Author and Poster Title
3M Drug Delivery Systems
Helen Derbyshire
Improved Product Performance Using a Novel Valve with Coated Components
SD
3M Drug Delivery Systems
Sarah Dexter
Pressurized Metered Dose Inhaler Valve Optimization for an Excipient-free Ipratropium/Albuterol Formulation
FDJK
ACG
Fernando Diez Menendez and Justin Kalafat
Impact of Internal Capsule Lubricant on the Aerosol Performance of Dry Powder Inhalers
Aptar Pharma
Segolene Sarrailh
Investigation of Leachables from Pressurized Metered Dose Inhalers Containing Hydrofluoroalkane Propellant 152a
Aptar Pharma
Gerallt Williams
Human Factor Studies for Unit-dose Nasal Sprays: A Case Study
SPSC
Cardiff University
Siamac Parker and Sion Coulman
Determining the Puncture Performance of Quali-V-I Hydroxypropylmethylcellulose Capsules at Very Low Moisture Content
AB
Chiesi Farmaceutici
Andrea Benassi and Stefano Biserni
Manufacturing Dry Powder Inhaler Capsules with High Strength Blends and Small Filling Weight
Clement Clarke International
Mark Sanders
Handling and Use Survey of a New Inhaler Training Whistle by Adult Chronic Obstructive Pulmonary Disease Patients
LR
Consort Medical
Liset Rodriguez
Spray Characterization of a Unit Dose Nasal Spray Device to Evaluate Performance Consistency
ED
Cynbiose Respiratory
Emilie Dalloneau
Evaluation of Drug Transport into Cerebrospinal Fluid After Oral or Nasal Administration to Cynomolgus Macaques
GH
DFE Pharma
Gerald Hebbink and Harry Peters
Electrical Charge Measurements of Lactose Powder Blends Delivered from Dry Powder Inhaler Capsule Devices Using the BOLAR
DFE Pharma
David Stadermann and Mohit Mehta
Long Term Round Robin Results of a Particle Sizing Method of a Dry Powder Inhalation Carrier
ST
Galecto Biotech
Susan Tantawi
Chronic Nose-only Inhalation Toxicity Study of TD139, a DPI Galectin-3 Inhibitor, in CD-1 Mice
EL
Gateway Analytical
Emily Landsperger
Dissolution of Microcrystalline Cellulose for Foreign Particulate Analysis
JT
Genentech
Jerry Tso
Accurately Assessing Drug Substance Particle Size Distribution for Dry Powder Inhalation Delivery
GP
GlaxoSmithKline
Graham Paul
Evaluating Lung Exposure and Clearance of an Inhaled Drug in Dogs by High Performance Liquid Chromatography Mass Spectrometry Analysis of Tissue or Lavage Fluid and Matrix-assisted Laser Desorption/Ionization Mass Spectrometry Imaging of Lung Sections
RB
Hovione
Raquel Barros
Wet Polishing: A Validated Route to Inhalation Grade Stable Glycopyrrolate
MB
Hovione
Maria Braga
From Laboratory to Commercial Scale: Impact of a Dosator-based Capsule Filling Process on a Dry Powder Inhaler Aerodynamic Performance
RC
Hovione
Rui Cruz
Carrier-based Formulation Dry Powder Inhalers Using TwinCaps®: Aerodynamic Particle Size Distribution and Laser Diffraction Analysis for a Typical Patient Population Peak Inspiratory Flow Rate Range
Hovione
Diana Fernandes
Spray Drying of Inhalable Biopharmaceuticals of Increasing Size and 3D Structure Complexity: From 30 to 250 kDa
AL
Hovione
Andreia Lopes
Cohesive-Adhesive Balance Approach for the Prediction of Dry Powder Formulation Performance by Atomic Force Microscopy
NN
Hovione
Nuno Neves and Eunice Costa
Statistical Approach on the Key Parameters of a Dosator-based Capsule Filling Process of Carrier-based and Spray Dried Powders: Impact on the In Vitro Aerodynamic Performance
Hovione
Beatriz Noriega Fernandes
An Analytical Quality by Design Approach to Predict Dissolution of Dry Powders Inhalers with Apparatus IV
MS
Hovione
Mariana F. Silva and Eunice Costa
Implementing a Spray Drying Process and Aerodynamic Performance Characterization for Nasal Dry Powder Formulations
LS
Hovione
Luis Sousa and Eunice Costa
Impact of Capsule Dedusting on the Aerodynamic Performance of Dry Powder Inhaler Formulations
Insmed
Zhili Li
Aerosol Performance and Rat Lung Pharmacokinetics of a Dry Powder Hexadecyl Treprostinil (C16TR) Formulation Containing Trehalose
MF
IPAC-RS
Lee Nagao and Manfred Fischer
Spray Pattern Testing Relevance and Methodology: An IPAC-RS Survey
NR
Kiel University
Nancy Rhein and Regina Scherließ
Can Aerodynamic Performance of the Parteck M DPI Carrier be Improved by the Addition of Magnesium Stearate?
KH
MEGGLE
Karin Hellauer
Influence of Humidity and Process Parameters on Capsule Filling of Dry Powder Inhalation Blends
HD
Mundipharma
Helen Danagher
Performance of Fluticasone Propionate/Formoterol Fumarate Breath-triggered Inhaler (flutiform® k-haler® 50/5μg And 125/5μg) Under Simulated Patient Use
JPGA
Nanoform
Jenni Pessi and Gonçalo Andrade
Controlled Expansion of Supercritical Carbon Dioxide Solutions for the Production of Nanoparticles for Inhalation 
Nanopharm
Gonçalo Farias
Investigating the Microstructure of Breo Ellipta Using Orthogonal Analytical Approaches
Nanopharm
Gonçalo Farias
Utility of the Morphologi 4-ID System to Perform Morphologically-directed Raman Spectroscopy Analysis of Nasal Suspension Formulations
Novartis
Juergen Jauernig
Use of Biophysical Modeling to Develop Indacaterol/Glycopyrronium/Mometasone Furoate Inhaled Combination: Results from a Salt-Bridging Study of Indacaterol in Patients with Asthma
EC
OptimHal-ProtecSom
Edouard Curran
Analysis of the Impact of Specially Designed Annubar Probe (DigitHal®) Flow Meter Inserted into a Valved Holding Chamber
ME
OptimHal-ProtecSom
Myriam Eckes
Effect of Spacer Volume on Drug Delivery Using Mechanical Ventilation: An In Vitro Study
ME
OptimHal-ProtecSom
Myriam Eckes
In Vitro Evaluation of a New Small Volume Spacer Used in Mechanical Ventilation
KL
PA Consulting
Kian Min Lim
Validation of a Deep Learning Model for Inhalation Information Characterization
PA Consulting
Mayur Patel
Drug Delivery Device Development: Platform Approach to Human Factors
Philip Morris International
Mahdi Asgari
Aerosol Evolution and Deposition in the Human Upper Respiratory Tract
JH
Philip Morris International
Julia Hoeng
Characterization of the Vitrocell® Cloud SEQ 24 System and its Application in Exposure to Aerosolized Bortezomib and Ibuprofen
Dv
Philips Respironics
Dirk von Hollen
Investigation of the Sputtering Event with Jet Nebulizers
Dv
Philips Respironics
Dirk von Hollen
Method to Determine Emitted Dose and Eye Deposition of Nebulizer-Facemask Combinations Under Simulated Conditions
Research Center Pharmaceutical Engineering
Thomas Wutscher
Influence of Storage Humidity and Powder Fill Level on Charging Behavior of Different Capsules Types
Trudell Medical International
Jolyon Mitchell and Jason Suggett
How Does Watching an Instructional Video Affect Inhalation Technique with a Dry Powder Inhaler?  A Small-Scale Scoping Study with Adult Volunteers Naïve to Dry Powder Inhaler Use
Trudell Medical International
Jolyon Mitchell and Jason Suggett
Simulating the Impact of Delayed Inhalation Upon Medication Delivery from Suspension and Solution Pressurized Metered Dose Inhalers Used With and Without a Valved Holding Chamber
LV
Université de Tours
Laurent Vecellio
Influence of Mouthpiece Design on Retronose® Performance
NC
University of Alberta
Nicholas Carrigy and Warren Finlay
Comparison of Spray Drying and Atmospheric Spray Freeze Drying for the Production of Active Anti-tuberculosis Bacteriophage D29 Dry Powder for Inhalation
University of Alberta
Hui Wang
Agitation Method Affects Colloidal Stability of Pharmaceutical Suspensions
University of Alberta
Hui Wang
Increasing Particle Surface Roughness as a Promising Strategy to Improve Colloidal Stability of Pharmaceutical Suspensions
University of Bath
William Ganley
Automated Classification of Dry Powder Inhaler Agglomerate Particles Using Cluster Analysis and Morphologically-directed Raman Spectroscopy
University of Bonn
Kai Berkenfeld
Aerosol Performance of Commercial pMDI Formulations Determined by Next Generation Impactor Using Modified 3D Printed Induction Ports
CT
University of Burgundy
Cedric Thomas
Study of Interactions Between Fine and Coarse Lactose by Microwave Microscopy
JE
Uppsala University
Johanna Eriksson
A Method for Determining the Wetting of Poorly Soluble Inhalation Compounds
JR
Uppsala University
Jonas Rudén
Comparison Between High and Low Shear Mixers in the Formation of Adhesive Mixtures for Dry Powder Inhalers
Uppsala University
Sohan Sarangi
Numerical Modeling of Binary Collision of Adhesive Units
LR
Vectura
Leszek Roszczyk
Development of a Stable Spray Dried Formulation Suitable for Filling into a Foil Blister-based Primary Pack Using Drum Filling Technology
AW
Vectura
Amy Worle
The Addition of Magnesium Stearate to Formulations as a Method to Facilitate the Use of a Volumetric Filling Technology
AD
Warsaw University of Technology
Agata Dorosz
Time-dependent Aerosolization Characteristics and Emission Kinetics of Dry Powder Inhaler Formulations
MO
Warsaw University of Technology
Marcin Odziomek
The Effect of Generation Conditions on the Droplet Size Distribution of Aerosols Released from Electronic Cigarettes
World Medicine
Metin Karabulut
Evaluation of a Dry Powder Inhaler Formulation with Enhanced Granule Surface Roughness to Reduce Agglomeration

↑ Back to Top